How to Cut & Strip Ethernet Cables Using a Wire Tool

Working with Ethernet cables can be challenging. For a beginner, it can get extremely tough and even messy sometimes. You need a professional, especially if you are working with them for the first time. One of the most challenging parts is to cut and strip a cable perfectly without damaging the internal layer of protection and conductors. Furthermore, you can easily damage the entire cable by making one wrong cut. 

There is a tool for cutting and stripping an Ethernet cable like a pro. This article will discuss that wire tool and the best way to use it as a professional. 

What exactly is a Wire Cutting & Stripping Tool? 

If you are working in the networking industry, you may have heard of this tool. This is a handheld wire-cutting and stripping device. People in the networking industry, like electricians, use it daily. You can use it to make a clean cut on your cable. This will offer a secured network connection. In addition to that, this cutter will not cause any damage to your cables. 

The other purpose of this tool is to strip the cable. You can use it to remove the outer jacket from your Ethernet cable. In addition, you need to do that carefully without damaging the internal layer of the cable. It would be best to practice before performing this task. These functionalities make it a perfect companion for electricians and other networking specialists. 

Components of Ethernet Cables Cutting Tool 

There are several components of this tool. You can use any one of them based on the task at hand. Since it is a handheld tool, you can carry it without hassle. Let’s take a look at all the components of this tool:

• There is a knob at the top of the tool. You can use it to adjust the height of your blade to make a clean cut on the cable’s jacket. In addition to that, there is also a cassette for the cable to rest on. 
• You can take that cassette out to use it for various types of Ethernet cables. 
• There is also a comb for coaxial cable. 
• Lastly, it has a blade to cut the ends of the cable. You can use it to cut both Ethernet and coaxial cables. 

Remember these components and their working; you will never go anywhere with this tool. 

How to Use it?

This cutter has a highly user-friendly design. Just practice a couple of times before using it. This way, you will not have to worry about making a mess. Here are a few easy steps to use this tool like a pro:

• First, you need to check the cable and the measurements for cutting and stripping a cable. 
• Then you need to adjust the knob on the top. You can rotate it counterclockwise to adjust the height of the blade. 
• Insert the cable inside the slot and make sure you have about 3 inches of cable on the other side. 
• Now you can adjust the knob to set it perfectly on the cable jacket. 
• This step is essential. Rotate the tool clockwise or counterclockwise to score the cable. 
• The purpose of the previous step is to score the jacket, not to cut it. Make sure to do so. 
• Then simply bend the cable, and the jacket will tear apart without any hassle. 

Similarly, you can cut the cable by inserting it in the cutting slot. Furthermore, this is a straightforward process. This tool has an all-in-one approach when it comes to Ethernet cable cutting and stripping. In addition to that, its ergonomic design makes it extremely easy to use and hold. It has a design to reduce your hand fatigue while working. Lastly, this tool has been customer-approved and field-tested to ensure maximum results and safety.