Bulk Cat6a Riser CMR 1000ft Solid Bare Copper Ethernet Network Cable
Cat6a riser CMR 1000ft cables run fast networking over a distance longer than 180 ft. These cables are best to run networking used to transfer voice and video, which require heavy bandwidth. The main characteristic of our cable is 10 gig networking over 320 ft. The previous 6 gen cable could only run a max of 180ft if you use a 10 gigs network. The same goes for frequency as this cable can run frequency up to 750 MHz, double that of the previous generation. This cable is (suitable) for harsh environments, factory automation processes, IP cameras, data communication, and countless other applications. This cable can support a (pure) copper conductor, which ensures fast and reliable data transmission. The operating temperature of our cable goes as low as -40°C and as high as +80°C. Our cable supports frequencies up to 750 Mhz. The thickness of our cable is 23 AWG (American Wire Gauge) which makes it easy to move around tight spaces. The length of this cable is 1000ft.
Cat6a riser cables consist of Riser-rated Jackets made from fire-rated material to withstand high temperatures in vertical spaces inside the buildings. Riser-rated cables are made to install in a riser-rated area, a small rising space inside a wall or an elevator shaft. The fire resistance comes from the Teflon, which covers the jacket. These cat6a riser cables can be run fast networking over a distance longer than 180 ft. These cables are best to run networking used to transfer voice and video, which require heavy bandwidth. The main characteristic of our cable is 10 gig networking over 320 ft. The previous 6 gen cable could only run a max of 180ft if you use a 10 gigs network. The same goes for frequency as our cable can run frequency up to 750 MHz, double that of the previous generation. Installed anywhere (except) in plenum spaces. The only drawback of using riser-rated cables is that you cannot use them in a Plenum-rated area. Because if it burns, it will emit toxic fumes because it doesn’t have Teflon outer coating.
Cat6a riser cables are manufactured by Monk Cables, a leader in ethernet cable manufacturing. It is (Fluke Tested) by Fluke Cable Analyzer DSX-1800. It is also RoHS (Complaint) based on the European Union’s Directive 2002/95/EC. This cable has full ANSI/TIA 568 Certification. Additionally, it is also TIA/EIA verified.